| 序号 |
论文名称 |
期刊名称 |
期刊类别 |
时间 |
| 1 |
Modification of Frictional Properties of Hydrogel Surface via Laser Ablated Topographical Micro-Textures |
Nanomaterials |
SCI（II区） |
2022 |
| 2 |
One-step synthesis of Ti3+ self-doped CTO/rGO composites by pulsed laser ablation in liquid with enhanced photocatalytic activity in water purification |
Colloids and Surfaces A: Physicochemical and Engineering Aspects |
SCI（II区） |
2022 |
| 3 |
Friction regulation of laser textured PVA hydrogels against a titanium alloy |
Optics and Laser Technology |
SCI（II区） |
2022 |
| 4 |
Recent defect passivation drifts and role of additive engineering in perovskite photovoltaics |
nano energy |
SCI（I区） |
2022 |
| 5 |
Light trapping PMMA planar ridged waveguide on a laser textured silicon substrate for ultra-low reflectivity |
Optics and Laser Technology |
SCI（II区） |
2022 |
| 6 |
Enhanced strength-ductility of CoCrFeMnNi high-entropy alloy with inverse gradient-grained structure prepared by laser surface heat-treatment technique |
Journal of Materials Science and Technology |
SCI（I区） |
2022 |
| 7 |
Effects of annealing process parameters on microstructural evolution and strength-ductility combination of CoCrFeMnNi high-entropy alloy |
Materials Science and Engineering: A |
SCI（I区） |
2022 |
| 8 |
Low Dark Current and Performance Enhanced Perovskite Photodetector by Graphene Oxide as an Interfacial Layer |
nanomaterials |
SCI（II区） |
2022 |
| 9 |
Polarization-dependent Bloch oscillations in optical waveguides |
Optics Letters |
SCI（II区） |
2022 |
| 10 |
Microstructure and mechanical properties of dual wire-arc additive manufactured Al-Co-Cr-Fe-Ni high entropy alloy |
MATERIALS LETTERS |
SCI（II区） |
2022 |
| 11 |
Research on plasma arc additive manufacturing of Inconel 625 Ni–Cu functionally graded materials（基于等离子弧的双丝镍铜梯度合金增材制造性能研究） |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
SCI（I区） |
2022 |
| 12 |
Plastic deformation behavior of 316 stainless steel subjected to multiple laser shock imprinting impacts |
OPTICS AND LASER TECHNOLOGY |
SCI（II区） |
2022 |
| 13 |
Microstructure and enhanced tensile properties of AlCoxCrFeNi high entropy alloys with high Co content fabricated by laser melting deposition |
JOURNAL OF ALLOYS AND COMPOUNDS |
SCI（II区） |
2022 |
| 14 |
Stainless steel bipolar plate fuel cell with different flow field structures prepared by laser additive manufacturing |
International Journal of Heat and Mass Transfer |
SCI（I区） |
2022 |
| 15 |
Microstructure and mechanical properties of composite strengthened high-chromium cast iron by laser quenching and laser shock peening |
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T |
SCI（II区） |
2022 |
| 16 |
Research on preparation and water collection characteristics of bionic pattern surface for multi-order combination - multi-segment transport |
Optics and Laser Technology |
SCI（II区） |
2022 |
| 17 |
Effect of quench-tempering and laser quenching on the microstructure and properties of highchromium cast iron |
Journal of Materials Research and Technology-JMR&T |
SCI（II区） |
2022 |
| 18 |
Position effect of laser beam waist in quartz-enhanced photoacoustic spectroscopy |
INFRARED PHYSICS & TECHNOLOGY |
SCI（II区） |
2022 |
| 19 |
Surface plasmon enhancement in different spatial distributions of nanowires and two- dimensional materials |
PHYSICAL CHEMISTRY CHEMICAL PHYSICS |
SCI（II区） |
2022 |
| 20 |
High-performance self-powered visible-blind ultraviolet photodetection achieved by ferroelectric PbZr0.52Ti0.48O3 thin films |
JOURNAL OF ALLOYS AND COMPOUNDS |
SCI（II区） |
2022 |
| 21 |
Effects of WC grain size on surface hardening of WC-10Co cemented carbides by pulsed electron beam irradiation |
Vacuum |
SCI（II区） |
2022 |
| 22 |
Reduced Graphene Oxide-Based Dielectric Nanocomposites with Small Dielectric Relaxation Times for Emerging Dielectric Electronics with High-Frequency Performance Demands |
ACS Applied Nano Materials |
SCI（II区） |
2022 |
| 23 |
Significant transitions of microstructure and mechanical properties in additively manufactured Al-Co-Cr-Fe-Ni high-entropy alloy under heat treatment |
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING |
SCI（I区） |
2021 |
| 24 |
Fabrication of bulk AlCoCrFeNi high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): Microstructure and mechanical properties |
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY |
SCI（I区） |
2021 |
| 25 |
Enhanced strength-ductility of CoCrFeMnNi high-entropy alloy with inverse gradient-grained structure prepared by laser surface heat-treatment technique |
Journal of Materials Science & Technology |
SCI（I区） |
2021 |
| 26 |
Effect of magnetic Field on the microstructure and mechanical properties of inconel 625 superalloy fabricated by wire arc additive manufacturing |
JOURNAL OF MANUFACTURING PROCESSES |
SCI（II区） |
2021 |
| 27 |
Laser textured superhydrophobic overlay cavity structure as an acoustic metasurface with enhanced underwater sound insulation performance |
Applied Acoustics |
SCI（II区） |
2021 |
| 28 |
A novel laser shock post-processing technique on the laser-induced damage resistance of 1w HfO2/SiO2 multilayer coatings |
High Power Laser Science and Engineering |
SCI（II区） |
2021 |
| 29 |
Impact of surface gradient structures on mechanical properties of a dualphase AlCrFe2(Ni0.85Co0.15)2 multi-component eutectic alloy |
Journal of Alloys and Compounds |
SCI（II区） |
2021 |
| 30 |
Low dispersion mirror with a broad bandwidth and high laser damage resistance |
Optics Letters |
SCI（II区） |
2021 |
| 31 |
Nanosecond laser cleaning for enhanced zinc coating quality of HSLA steel |
Optics and Laser Technology |
SCI（II区） |
2021 |
| 32 |
The effect of laser energy density on the microstructure, residual stress and phase composition of H13 steel treated by laser surface melting |
JOURNAL OF ALLOYS AND COMPOUNDS |
SCI（II区） |
2021 |
| 33 |
Routing a glass substrate via laser induced plasma backward deposition of copper seed layer for electroplating |
Optics and Laser Technology |
SCI（II区） |
2021 |
| 34 |
High-performance self-powered visible-blind ultraviolet photodetection
achieved by ferroelectric PbZr0.52Ti0.48O3 thin films |
Journal of Alloys and Compounds |
SCI（II区） |
2021 |
| 35 |
Evaluation of microstructure and mechanical properties of Fe–1.2Mn–0.3Cr–1.4Ni–0.4Mo–C steel welded joints |
Journal of Materials Research and Technology |
SCI（II区） |
2020 |
| 36 |
Hypergyrating Droplets Generated on a Selective Laser-Textured Heterogeneous Wettability Surface |
Langmuir |
SCI（II区） |
2020 |
| 37 |
Surface wettability induced variation of underwater acoustic transmission coefficient of the membrane resonators |
Materials Science & Engineering B |
SCI（II区） |
2020 |
| 38 |
Numerical simulation and experimental study for aerodynamic characteristics and powder transport behavior of novel nozzle |
Optics and Lasers in Engineering |
SCI（II区） |
2020 |
| 39 |
Microstructure and corrosion resistance property of laser transformation hardening pre-hardened AISI P20 plastic die steel |
Optics and Laser Technology |
SCI（II区） |
2020 |
| 40 |
Selective maintenance policy for a series-parallel system considering maintenance priority of components |
IEEE Access |
SCI（II区） |
2020 |
| 41 |
Quadri-directionally anisotropic droplets sliding surfaces fabricated by selective laser texturing of aluminum alloy plates |
Applied Surface Science |
SCI（II区） |
2020 |
| 42 |
Picosecond Laser-Induced Hierarchical Periodic Nearand Deep-Subwavelength Ripples on Stainless-Steel Surfaces |
nanomaterials |
SCI（II区） |
2020 |
| 43 |
Drag reduction effect of ultraviolet laserfabricated superhydrophobic surface |
Surface Engineering |
SCI（II区） |
2020 |
| 44 |
Loss Estimation for Network-Connected UAV/RPAS Communications |
IEEE ACCESS |
SCI（II区） |
2020 |
| 45 |
Synthetic spectra generated by boundary equilibrium generative adversarial networks and their applications with consensus algorithms |
Optics Express |
SCI（II区） |
2020 |
| 46 |
Fabrication of bulk Al-Co-Cr-Fe-Ni high-entropy alloy using combined cable wire arc additive manufacturing (CCW-AAM): Microstructure and mechanical properties |
Journal of Materials Science & Technology |
SCI（I区） |
2020 |
| 47 |
Ultrafine Co3Se4 Nanoparticles in Nitrogen-Doped 3D Carbon Matrix for High-Stable and Long-Cycle-Life Lithium Sulfur Batteries |
Advanced Energy Materials |
SCI（I区） |
2020 |
| 48 |
Effects of different contact film thicknesses on the surface roughness evolution of LY2 aluminum alloy milled surface subjected to laser shock wave planishing |
Surface & Coatings Technology |
SCI（I区） |
2020 |
| 49 |
Fabrication and characteristics of back-gate black phosphorus effect field transistors based on PET flexible substrate |
Applied Nanoscience |
SCI（II区） |
2019 |
| 50 |
Location dependence of microstructure and mechanical properties on wire arc additively manufactured nuclear grade steel |
Vacuum |
SCI |
2019 |
| 51 |
In-situ wire-feed additive manufacturing of Cu-Al alloy by addition of silicon |
Applied Surface Science |
SCI |
2019 |
| 52 |
Microstructure and mechanical properties of Inconel 625 fabricated by wirearc additive manufacturing |
Surface & Coatings Technology |
SCI |
2019 |
| 53 |
Removal and recovery of iodide by using a new metal-organic
framework based on mixed tetrazolate and carboxylate linkers |
Materials Letters |
SCI |
2019 |
| 54 |
Microstructure and mechanical properties of asdeposited
and heat-treated additive manufactured 9Cr steel |
Materials Science and Technology |
SCI |
2019 |
| 55 |
Effects of Multiple Laser Peening impacts on Mechanical
Properties and Microstructure Evolution of 40CrNiMo Steel |
Journal of Materials Engineering and Performance |
SCI |
2019 |
| 56 |
Investigation on the microstructure and corrosion properties of Inconel
625 alloy fabricated by wire arc additive manufacturing |
Materials Research Express |
SCI |
2019 |
| 57 |
Microstructure and mechanical properties of 9Cr martensitic heat-resistant steel fabricated by wire and arc additive manufacture technology |
Materials Express |
SCI |
2019 |
| 58 |
WAILS:Watershed Algorithm With Image-Leve Supervision for Weakly Supervised Semantic Segmentation |
IEEE Access |
SCI |
2019 |
| 59 |
Study on magnetic properties of oriented silicon steel scribed by ultrafast laser |
PROCEEDINGS OF SPIE |
SCI |
2019 |
| 60 |
Study on magnetic properties of oriented silicon steel scribed by ultrafast laser |
Pacific Rim Laser Damage |
SCI |
2019 |
